Is Raptor an epoxy?
U-POL RAPTOR Epoxy primer is a 2K anti-corrosive VOC compliant primer with excellent salt spray resistance for application to most substrates. Suitable as a primer or as a primer filler for industrial refinish applications, the primer also provides excellent anti-rust protection.
Does Raptor paint need primer?
Cured RAPTOR can easily be touched up. Just clean the surface, sand and featheredge a few inches into the surrounding area, re-clean, and mix and apply as usual. No need to prime again unless you sand down to bare metal.
Do you have to prime before Raptor liner?
No need to prime again unless you sand down to bare metal. Remember, if it’s been more than 5 hours since the last coat of RAPTOR has been applied, allow RAPTOR to cure for 24 hours, then lightly scuff and apply additional coat(s).
Which epoxy primer is the best?
- Custom Shop Black Epoxy Primer/Sealer KEP 406/KEP 402 : Best Overall.
- Speedokote Epoxy Fast Dry 2.1 : Quickest Drying.
- SprayMax 2K Activated Epoxy Primer : Best For Small Jobs.
- Raptor Anti-Corrosive Epoxy Primer : Best For Already Rusty Surfaces.
- Rust-Oleum Automotive 2-in-1 Filler And Sandable Primer : Best Budget Option.
Does epoxy primer stop rust?
Rust needs water and oxygen. The epoxy will seal these things out, but rust in pits is porous and will contain some water and some oxygen.
Is Raptor paint any good?
Raptor Liner Review – The Final Verdict Absolutely! It’s extremely durable, easy to apply, and affordable. If you’re using it for its intended purpose (most typically, bedliner coating), this is hands down one of the best bed liners on the market.
Can Raptor paint smooth?
Applying raptor liner is much, much easier than automotive paint. Plus, it will hold up to much more abuse. But you should consider the texture – it is rough. It’s not anything like the smooth finish you’d get with typical paint.
Is Raptor liner any good?
Raptor Liner Review – The Final Verdict It’s extremely durable, easy to apply, and affordable. If you’re using it for its intended purpose (most typically, bedliner coating), this is hands down one of the best bed liners on the market.
Is 2K primer epoxy?
Registered. 2k primer is a build primer for covering slight imperfections, no corosion resistance. epoxy is thin and for first coats on bare steel and the final seal before paint.
Does epoxy paint need primer?
One of the most common questions I get with epoxy floors is if it is necessary to prime the floor before applying the epoxy floor coat. The right primer will guarantee better adhesion of your floor coats to the substrate. It will give your floor a longer life and will reduce the risk of the coat chipping or breaking.
Can you brush epoxy primer?
Brushing primer is fine, but if it’s ultimately going to be a properly finished surface you will have to sand the primer level before moving on. That may or may not be more work than spraying it and cleaning the gun.
What does anti corrosive epoxy primer do for Raptor?
The advanced resin technology in RAPTOR Anti-Corrosive Epoxy Primer improves adhesion to bare metal and most other prepared surfaces, and promotes intercoat performance to further extend the life of RAPTOR protective coating. It contains a blend of anti-corrosive additives to inhibit rust and corrosion and offers excellent salt spray resistance.
How to prepare powder coat for a raptor application?
Follow the epoxy primer manufacturer’s recommendations for top coating. Generally, after primer is dry / cured, sand surface with 280-360) grit sandpaper, or whatever grit recommended by the manufacturer for top coat application, blow off, and re-clean if necessary before applying RAPTOR. How do you prepare powder coat for a RAPTOR application?
How to prepare aluminum for a raptor application?
How do you prepare aluminum for a RAPTOR application? Clean the aluminum with a wax and grease remover and sand with P180 grit sandpaper. Apply one to two coats of RAPTOR Acid Etch Primer (UP5023) and use RAPTOR Adhesion Promoter (UP5024) for hard to reach areas. Allow to dry 20 minutes before applying RAPTOR.
What kind of products do you use for Raptor?
RAPTOR Adhesion Promoter. U-POL offers a complete line of accessory products to prep, apply and upgrade your RAPTOR application. Promotes paint adhesion to most automotive surfaces, like plastics, aluminum, galvanized metal, zinc, painted surfaces, fiberglass and even body fillers.