How do you change the water filter on a Whirlpool side by side refrigerator?

Filter 3: Step-by-step instructions

  1. Locate your water filter cover on the left side of the refrigerator’s base grille.
  2. Push the eject button to release the filter.
  3. Pull the filter out and discard it.
  4. Open your new filter and remove the protective coverings from the O-rings.

How do I reset my Whirlpool refrigerator after changing the water filter?

After changing the water filter, reset the status. Press and hold the “WATER FILTER” button for 3 seconds. When the system is reset, the water filter icon will return to its BLUE color and the words “Replace Filter” will disappear from the display.

Where is the filter reset button on a Whirlpool refrigerator?

The filter light and reset button are found inside the French door Whirlpool Fridge on the top right side.

Is there a reset button on a Whirlpool fridge?

Press the door switches and the refrigerator temperature button three times within 10 seconds. After releasing the switches, there should be a letter “S” display in the freezer section and an “E” in the refrigerator’s display.

What happens if you don’t change the water filter in your fridge?

Failing to change your fridge’s water filter can cause scaling and deposit buildup in the water and ice machine, which can seriously damage your fridge. This buildup tends to slow down the system, causing low flow, and negatively affects the flavor of your water.

Do you have to turn water off to change refrigerator filter?

When the water filter is at the bottom or its side and not in the top sticking down, you should turn off the water. Once the water pressure is off it will release easily. Just make sure you get the correct filter for your fridge otherwise it will damage the water system.

What happens when you use a water filter too long?

When your filter is left alone for a long time you will notice the taste of your water begins to change. The smell might even be affected as the minerals and chemicals that your filter was protecting you from come through.

How do you replace the water filter on a whirlpool refrigerator?

How to replace the filter in a Whirlpool refrigerator water filter: Location: Front base grille. Locate the filter and rotate the cap counter clockwise. Turn to the left to remove the filter. Pull the filter out. Slide the cap off the end of the cartridge and do not discard.

Where is the water filter on a whirlpool refrigerator?

Locate the water filter button on your refrigerator. The water filter button allows you to reset the light. This button is generally located above or below the water filter light. In some models of Whirlpool fridges, the button is inside the fridge and on other models, it is on the front of the door.

What does a whirlpool refrigerator filter do?

The filters work with a number of refrigerators from manufacturers such as Whirlpool, Kenmore , Amana , Kitchenaid , Jenn-Air, Maytag, Thermador , and others. These filters remove contaminants such as dirt, chlorine, lead, mercury, cysts, and other particulates that can affect the taste and smell of your filter.