How do I reset my ap9619?

Press the Reset button. The Status LED will flash alternately orange and green. Press the Reset button a second time immediately while the LED is flashing to reset the user name and password to their defaults temporarily.

How do I reset my APC management card?

First, we need to access the APC UPS web interface. Open your browser and enter the IP address of the APC UPS. After a successful login, you will be sent to the APC UPS Dashboard. Select the Reboot Management Interface and click on the Apply button.

How do I set up email notifications on APC?

Navigate to Administration > Notification > Email > Recipients. Click Add Recipient and enter in your email address. Configure the other email options as you’d like, ensuring Email Generation is enabled.

How do I reboot AP9631?

Factory reset APC AP9631 Network Management Card 2

  1. Turn on your APC UPS.
  2. Make sure your NMC has some LEDs on, which means it is at least alive.
  3. Stick a paper clip into the reset button, and hold it for at least 30s or until the status LED goes from green to amber.
  4. Release the reset button and click press it again.

How do I reset my APC login?

Press the Reset button a second time immediately while the LED is rapidly flashing – which will cause the LED to then go off – in order to reset the User Name and Password to their defaults temporarily (the default User Name and password are both apc).

Can PowerChute send email?

PowerChute Business Edition is capable of sending email to one recipient SMTP server, this means that all of the recipient email addresses must be on the same domain or relaying must be used on an outgoing SMTP server.

How do I reset my battery backup?

Follow this easy procedure to brain dead the Back-UPS:

  1. Disconnect any attached load. (
  2. Unplug the UPS from the wall socket.
  3. Disconnect the UPS’ internal battery. (
  4. Push and hold the “On” button on the UPS for 5 seconds (you might hear a click, chirp or lights will blink)
  5. Reconnect internal battery.

How do I reset my Smart UPS online?

APC Smart UPS – How to reset / restart

  1. Turn off and unplug UPS from wall.
  2. Press and hold the OFF button again.
  3. You may see a quick flash of the LED’s and you should hear an audible “”click”” from the UPS.
  4. Turn UPS back on.

How to recover Google account after factory reset?

Follow these instructions to recover Google account: 1 Visit the Google Account Recovery page on your favorite web browser. 2 Click on the ‘forgot email?’ option. 3 Then on the next screen, input your phone number or recovery email and click on Next.

How to bypass Google verification ( factory reset protection )?

1 Choose a suitable FRP bypass app, such as FRP Bypass APK, Pangu FRP Bypass APK. Some of them are not free to use. 2 Download the bypass tool on a USB drive. 3 Connect the USB drive to the phone via OTG cable. Then install the APK.

What do I need to recover my Gmail account?

Forgot the email address you use to sign in. Follow the steps to find your username. You’ll need to know: A phone number or the recovery email address for the account. The full name on your account. Follow the instructions to confirm it’s your account.

How can I Reset my Google Account Password?

Two of the easiest ways to reset password include requesting a verification code sent to your phone number and verifying your identity via certain methods. Step 1: On your favorite web browser, visit the Google Account Recovery page.