How do I remove the harddrive from my Sony Handycam?
No parts specified.
- Step 1 Hard Disk Drive (HDD)
- Place device on left side with lens facing right.
- Turn device over onto it’s top with the lens facing right.
- 64 Bit Mako Driver Kit.
- Remove the right side casing by pulling up and away.
- Using your fingers, lift the HDD from it’s right end, pivoting on it’s left end.
How do I format my Sony DCR sr68?
Open the hinge screen. 2. Use a pencil, toothpick, or similar instrument to press into the hole that says RESET next to it. If formatting and resetting the camera does not fix the error the HDD should be replaced refer to HDD replacement guide.
How do I calibrate my Sony Handycam?
How to calibrate the touch-panel LCD screen.
- Set the camcorder to the PLAY/EDIT mode.
- With the exception of the AC power adapter, disconnect any cables that may be connected to the camcorder.
- Open the LCD screen.
- On the LCD screen, touch the P-MENU button.
- Touch SETUP .
- Select STANDARD SET and then touch OK .
Why does my Sony Handycam keep turning off?
Most camcorders are designed to automatically turn off after a short period of time when not in use to help conserve the battery power. This normally occurs after the camcorder has been in the Standby mode for a few minutes and is normal operation.
What’s the problem with my Sony Handycam xr150?
I have a sony handycam HDR-XR150. Lately an error has come up when taping and when trying to download the video. HDD format error, a picture … read more My XR150 has a disk problem. I get an error: E:31:00. I can My XR150 has a disk problem. I get an error: E:31:00. I can not use the camera, nor download the video.
Is there a HDD format error, a picture?
HDD format error, a picture … read more My XR150 has a disk problem. I get an error: E:31:00. I can My XR150 has a disk problem. I get an error: E:31:00. I can not use the camera, nor download the video.
How to import pictures from a Handycam to a computer?
Follow these steps to import images from a Handycam® camcorder, Cyber-shot® camera, or α (Alpha) camera using PlayMemories Home™ software: Download and install the PlayMemories Home software on your computer. Insert a fully charged battery into your camera and then turn it on.