How do I decode a Ford 302 casting number?
How to Decode a Ford 302 Casting Number
- Decode the first character letter. Ford casting numbers always start with a letter for “Decade,” according to Classicmustang.com.
- Decode the second number.
- Decode the third character.
- Decode the 4th digit.
- Decode the next four characters.
How do I identify a Ford 302 head?
Ford 302 Cylinder Head Identification
- Number Location. The casting number is located under the valve cover, in the middle of the cylinder head.
- Number Decoding. The number within the code identifies the year of manufacture; a head with code C8ZZ-A would have been manufactured in 1968, and so forth.
- Other Considerations.
How do you tell the difference between a Ford 302 and a 351?
The 351 blocks were as much as 1.300 in. taller to allow for a longer Stroke . You can spot the difference pretty easily by looking at the front of the engine. On a 302 (or smaller c.i.d.) blocks, the distributor mount is almost flush with the top of the block (where the intake sits).
How do I know what Ford engine I have?
It is found underneath the bolts on the left or right side of the engine, near the front of the car. You can find the tag here on all six-cylinder engines made after 1964, and on some V8 engines. The tag is roughly three inches long, half an inch wide, and made of aluminum.
How can you tell a 460 head?
429/460 Fanatic The cylinder head casting numbers are located on the outside of the head, along the valve cover mounting rail and between the 3rd and 4th exhaust ports. The are visible simply by raising the hood and looking at the engine.
What are the casting numbers for a Ford small block?
Casting Number Years CID Engine Family Block D1OE-AA 1971-1974 302 Windsor Small-Block D1TE-AA 1971-1977 302 Windsor Small-Block D1TE-E 1971-1974 302 Windsor Small-Block D1VE 1971-1978 429/460 Ford Big-Block
What is the casting code for a Ford engine?
Ford’s part number convention generally follows the format of a four digit casting code, followed by a four digit basic part number, which will be “6015” for an engine block, followed by the revision version.
When did the Ford 302 casting number come out?
Ford casting numbers always start with a letter for “Decade,” according to Classicmustang.com. A Ford 302 engine can trace its roots to 1962 when it was first introduced in a Ford Fairlane. It remained in production till the mid 1990s.
How do you cast a Ford FE engine block?
Remove the spark plug and insert a wooden dowel into the cylinder until you hit the top of the piston and make a mark on the dowel. (Use the valve cover lip as a constant reference source.)