What size rims does a 2010 Ford Fusion have?
Ford Fusion 2010 2.5
| Tire | Rim | |
|---|---|---|
| 205/60R16 91T | 6.5Jx16 ET40 | 2.3 |
| 225/50R17 93V | 7.5Jx17 ET44 | 2.3 |
| 225/45R18 91V | 7.5Jx18 ET44 | 2.4 |
What bolt pattern is a 2010 Ford Fusion?
The bolt pattern for a ford fusion is pcd 5×108 (5×4. 25) .
What size tires fit 2010 Ford Fusion?
P225/50R17
SEL (P225/50R17)
Is a 2010 Ford Fusion a good used car?
Often regarded as one of the most engaging midsize cars, the 2010 Ford Fusion should be on your used car list if you prioritize good driving dynamics. Its excellent safety scores, roomy cabin and large trunk also make it a good choice for shoppers who need a practical used car.
What size rims fit a Ford Fusion?
Ford Fusion wheel bolt pattern. Select the year
| Fusion Bolt Pattern | PCD 5×114.3 See Adapters |
|---|---|
| Thread size | M12 x 1.5 Buy Lug Nuts |
| Stock Rim Sizes Range | 16×6.5 – 20×8.5 Get Hubcaps |
| Custom rim sizes range | 17×7.0 – 20×9.5 |
| Tire sizes | 205/60 R16, 225/50 R17, 225/45 R18, 235/35 R19, 245/30 R20 |
Does 5×112 fit 5×108?
Yes overall there is a 4mm difference on the PCD pattern but that equates to 2mm difference per bolt. With the PCD measured you can see the 2mm difference.
Will a 5×114 fit a 5×112?
Reversely ff your car has a 5×114. 3 hub you can put a 5×112 wheel on it using these wobble bolts. A very convenient feature if say the wheels you want are out of stock in the lug bolt pattern you need. These bolts will also work as standard lug bolts if you plan on swapping wheels often.
What size tire goes on a Ford Fusion?
| 2018 Ford Fusion | ||
|---|---|---|
| Rim Size | Tire Sizes | Ford Fusion Options |
| 16-Inch | 215-60-16 | S |
| 17-Inch | 225-50-17 235-50-17 | Energi PlatinumEnergi SEEnergi TitaniumSS HybridSESE Hybrid |
| 18-Inch | 235-45-18 | Energi PlatinumEnergi SEEnergi TitaniumPlatinum HybridSESE HybridTitaniumTitanium Hybrid |
What problems do 2010 Ford Fusion have?
The following are common problems associated with the 2010 Ford fusion model:
- 1 Exhaust Gas Recirculation Valve (EGR) malfunction.
- 2 2010 Ford Fusion Antilock system (ABS) failure.
- 3 Irregular shifts during deceleration.
- 4 Proximity sensors unable to respond.
How many miles will a 2010 Ford Fusion last?
The average lifespan of a 2010 Ford Fusion is 200,000 miles but that can vary. You should keep up with the manufacturer’s suggested maintenance while also making sure You keep up with major services and regular oil changes. These cars are designed to last a long time.
What bolt pattern is the same as 5×108?
5×108 bolt pattern or 5×4. 3 in inches is used on 232 models. Wheels with this bolt pattern are most often used on Volvo, Chery, Ford, Ferrari, Peugeot, Citroën. These numbers mean that the wheel has 5 lug holes, that form circle between the centers of these holes, and this circle diameter is 108 mm or 4.3″.
How big are the wheels on a 2010 Ford Fusion?
Ford Fusion 2010, 16″ Double 5-Spoke Silver Alloy Factory Wheel by Replace®. Size: 16″ x 6.5″. Bolt Pattern: 5 x 114.3mm. If your factory wheels have deteriorated with time and mileage, and you’re looking for new reliable wheels, then…
Are there any recalls on the 2010 Ford Fusion?
Ford Motor Company (Ford) is recalling certain 2010 Ford Fusion, Mercury Milan and 2010-2012 Lincoln MKZ vehicles that previously received a replacement passenger air bag under recall 16V-384, 17V-024 or 18V-046.
What causes a Ford Fusion to not stop properly?
This reaction may cause the valves to not close properly. If the valves do not properly close, additional brake pedal travel may be required to stop the vehicle, increasing the risk of a crash.
What to do if your Ford Fusion has a stuck valve?
Ford will notify owners, and dealers will flush the brake system with DOT 4 fluid and install a new brake fluid reservoir cap. In addition, the HCU will be tested to detect a possible stuck valve condition, replacing the HCU as necessary.