How do I reset my HP LaserJet p2015dn printer?

How do I reset my HP LaserJet p2015dn printer?

Use the following procedure to perform a network reset.

1. Turn off the printer.
2. Press and hold the Job Cancel button.
3. Turn on the printer and continue to hold the Job Cancel button for approximately 10 seconds, but no longer than 20 seconds.
4. Release the Job Cancel button.

What is a cold reset for an HP printer?

Answer. On HP printers, a “cold reset” causes the printer to return to its factory default settings, which among other things, causes it to try and retrieve its configuration information from a BOOTP server. A cold reset is often needed if the printer’s configuration has been corrupted or changed using the front panel.

How do I manually reset my HP printer?

1 Restore Defaults

1. From the screen on your printer, navigate to Setup.
2. Tap Tools.
3. Tap Restore Defaults.
4. Tap Yes.
5. The printer will restart.
6. Once restarted, your printer will have been reset to factory default settings.

How do I connect my HP LaserJet p2015dn?

Open browser and enter printer’s IP address in URL field.

1. Select Network Settings tab.
2. Select Manual IP configuration.
3. Enter fixed IP provided by Network Services.
4. Save, then restart printer.

How do you clear a paper jam on a HP LaserJet P2015?

Answer/Solution The HP LaserJet P2015 may come up with Paper Jam Light solid ON and would show the same light pattern even if the printer is power cycled. Press and hold the GO button on the control panel of the printer. Turn on the printer and continue to hold the GO button for at least 50 seconds.

How do I print a configuration page on a HP LaserJet P2015?

Use the following directions to print out a configuration page on your HP printer….

1. Walk over to the printer. On the printer, press the Menu button until Information Menu appears on the display.
2. Press the Item button until Print Configuration or Print EIO Page appears on the display.
3. Press Select.

How do I change the IP address on my HP printer?

Click Networking tab, change the required IP address, subnet mask, and gateway. Change the IP configuration method from Auto to Manual, click Apply, and OK. Change back the IP address of the computer to the original IP address.

How do I Reset my HP LaserJet p2015 printer?

Use the following procedure to perform a network reset. Turn off the printer. Press and hold the Job Cancel button. Turn on the printer and continue to hold the Job Cancel button for approximately 10 seconds,but no longer than 20 seconds. During this process, the Attention light turns on.

How do you cold reset a HP printer?

Original Procedure. Most HP models, including 4000, 4100, 8000, 8100, 8150. Turn the printer off. While holding down the “Go” or “Online” button, turn the printer on. Release the button when the printer display says “Cold Reset” or “Resetting”.

How to configure HP LaserJet p2015dn network settings?

Configure fixed IP for LaserJet P2015dn network printer, connect to Mac OS and Windows laptops Reset printer JetDirect to factory settings to clear network settings. Plug in ethernet cable, make sure wall jack is active, should see green and orange blinking lights on printer’s ethernet connector.

How do you reset a HP Jetdirect printer?

NOTE A cold reset also resets all the HP Jetdirect settings as well as the printer settings. Use the following procedure to perform a cold reset. Turn off the printer. Press and hold the Go button. Turn the printer on, and continue to hold the Go button for at least 5 seconds, but not longer than 15 seconds.