How do I factory reset my RouterBOARD?

How do I factory reset my RouterBOARD?

Mikrotik Factory Reset Guide

1. Disconnect the power cord from the unit.
2. Hold the reset button and do not release.
3. Plug the power cord in and wait until the ACT light starts flashing.
4. Now release the button to clear configuration.
5. Wait for a few minutes for the router to clear and restore the factory settings.

How do I reset my mikrotik RouterBOARD 1100AHx4?

How to factory reset (hard reset) MikroTik RouterBOARD 1100AHx4 (RB1100AHx4) :

1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds.

How do I reset my mikrotik RouterBOARD hAP AC Lite?

Re: Not able to reset configuration via reset button: hAP lite

1. unplug the USB cable to power off.
2. hold the RES button with a pen.
3. plug power (keep holding button)
4. when ACT LED starts flashing, release button.
5. wait some 15-20 seconds and ACT LED will flash twice, it means process is finished.

How do I reset my SXT lite5?

Factory Reset from Button

1. Connect SXT lite device to PoE Injector PoE port and LAN cable connect to PC.
2. Use a needle or paper clip to reset the button.
3. Press the reset button and power ON Mikrotik PoE Adapter to turn on the device.
4. Release the reset button after 5 seconds of power on the PoE injector.

How do I reset my Haplite?

How to reset configuration

1. unplug the device from power.
2. press and hold the button right after applying power. Note: hold the button until LED will start flashing.
3. release the button to clear configuration.

How do I reset my 4011?

How to factory reset (hard reset) MikroTik RouterBOARD 4011 (RB4011iGS+RM) :

1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds.

How can I reset my MikroTik admin password?

when you lost login admin for router, isn’t ways to recovery or reset, you must reinstall by netinstall of your router OS. there is no way to reset admin password. If you forget the password and not able to login, you must reinstall router from scratch…

How can I reset my MikroTik password?

Note: RouterOS password can only be reset by reinstalling the router or using the reset button (or jumper hole) in case the hardware is RouterBOARD. For X86 devices, only complete reinstall will clear the password, along with other configuration.

What is MikroTik default password?

admin
Every router is factory pre-configured with the IP address 192.168. 88.1/24 on the ether1 port. The default username is admin with no password.

How do I reset the reset button on my RouterBOARD?

Run the command “/system reset-configuration” from a command-line interface; Do it from the System -> Reset Configuration menu in the graphical user interface; RouterBOARD devices are fitted with a reset button which has several functions:

How to reset the default configuration of a router?

If you still have access to your router and want to recover its default configuration, then you can: ) run the command “/system reset-configuration” from command line interface ) do it from System -> Reset Configuration menu in the graphical user interface. RouterBOARD devices are fitted with a reset button which has several functions:

Is there a way to reset the RouterOS password?

Note: RouterOS password can only be reset by reinstalling the router or using the reset button (or jumper hole) in case the hardware is RouterBOARD. For X86 devices, only complete reinstall will clear the password, along with other configuration.

How do I Reset my MikroTik router to factory settings?

Most RouterBOARD devices are fitted with a reset button. Using: unplug device from power, press and hold the button right after applying power and wait until the USER LED starts flashing. Now release the button to clear configuration.