Are metal studs nominal dimensions?
Wood framing is commonly referenced in nominal terms. A 2×4, for example, is really 3-1/2″ x 1-1/2″. Metal framing on the other hand, is referenced by actual size. As a result you will get exactly what you order.
What are the dimensions of a metal stud?
Metal Stud Sizes The most common size stud is a 3 5/8″ wide stud. Combined with a layer of 5/8″ gypsum wall board on both sides will give a 4 7/8″ thick wall.
What are the standard lengths for 2×6?
When using studs, other dimensions of 2-by-4 and 2-by-6 lumber is used. Standard lengths for these range from 8 feet up to 16 feet. These lengths are used for wall plating, window and door framing and bracing.
How wide is a 3 5 8 metal stud?
Exterior Structural
| Member Depth | Flange Width | Material Thickness (GA) |
|---|---|---|
| 3-5/8″ – 12″ | 1-3/8, 1-5/8″, 2″ & 2-1/2″ Leg | 12 ga 97 Mil |
| 2-1/2″ – 12″ | 1-1/4″ – 1-1/2″, 2″ & 2-1/2″ Leg | 20 ga 33 Mil |
| 2-1/2″ – 12″ | 1-1/4″ – 1-1/2″, 2″ & 2-1/2″ Leg | 18 ga 43 Mil |
| 2-1/2″ – 12″ | 1-1/4″ – 1-1/2″, 2″ & 2-1/2″ Leg | 16 ga 54 Mil |
What is the typical stud size?
Two-by-six and two-by-four are the most common dimensions of wall studs. Standard walls of 8 feet have wall studs that are 92 inches. The studs are 104 1/2 inches in homes with 9-foot walls. Pre-cut studs are used in homes with a 10 foot wall.
Are 6 metal studs actually 6?
For Wall Framing A 600S metal stud measures 6 inches on its web, or long face. Thus a metal stud taking the place of a two-by-four measures 1 5/8 by 4 inches, and a two-by-six, 1 5/8 by 6 inches — slightly fatter but the same depth as their wood equivalents.
How much does a bunk of 2×6 cost?
Lumber Prices
| Board | Stud* | 10′ |
|---|---|---|
| 2×3 | ||
| 2×4 | $5.17 | $7.65 |
| 2×6 | $8.82 | $7.65 |
How many units is a 2×6?
S4S LUMBER UNIT SIZES
| S4S | WIDE | #PCS |
|---|---|---|
| 2X6 | 8 | 128 |
| 2X8 | 6 | 96 |
| 2X10 | 5 | 80 |
| 2X12 | 4 | 64 |