What kind of pinout does a USB device need?
USB A, B 2.0 and 3.0 Cable Pinout. The USB cable provides four pathways- two power conductors and two twisted signal conductors. The USB device that uses full speed bandwidth devices must have a twisted pair D+ and D- conductors. The data is transferred through the D+ and D- connectors while Vbus and Gnd connectors provide power to the USB device.
How many pins does a USB Type C connector have?
The USB Type-C connector has 24 pins. Figures 1 and 2, respectively, show the pins for the USB Type-C receptacle and plug. Figure 1. The USB Type-C receptacle. Image courtesy of Microchip. Figure 2. The USB Type-C plug. Image courtesy of Microchip. The D+ and D- pins are the differential pairs used for the USB 2.0 connectivity.
What should the temperature of a ss9013 pinout be?
This article describes SS9013 pinout, equivalents, uses, features, applications, and other details about where and how to use it in an electronic circuit. Max Storage & Operating temperature Should be: -55 to +150 Centigrade
Are there any alternatives to the ss9013 transistor?
Alternative transistors for SS9013 are S9013, S8050, 2N2222, BC337, BC338, output pins of some equivalents are different please see pinout details of the transistor you are willing to replace. SS9013 is a BJT NPN transistor manufactured in TO-92 package.
What kind of connector does a USB hub use?
The data is transferred through the D+ and D- connectors while Vbus and Gnd connectors provide power to the USB device. The USB Hub is used to connect many devices to the PC using a single USB connector.
What does a 4 pin connector on a motherboard do?
The 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you hear system beeps and warnings.SPEAKER +5VGNDGND PIN 1 Motherboard Pin Definition 1-7
Where do I put the pin on my Motherboard?
Motherboard Pin Definition 1-5 3 Internal Connectors Serial port connector (10-1 pin COM) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis.
What kind of current does a s9015 transistor have?
When looking at the flat side with the leads pointed downward, the three leads emerging from the transistor are, from left to right, the emitter, base, and collector leads. Here is an image showing the pin diagram of the this transistor. The S9015 transistor might have a current gain anywhere between 60 and 1000.
Who is the copyright of the s9015 datasheet?
Note: The Copyright of this S9015 Transistor Datasheet belongs to Fairchild Semiconductor and is provided for information only.
What can I replace the s9014 NPN transistor with?
You can replace the S9014 with the KSP05, KSP06, KTC9014, MPSW05, MPSW05G, MPSW06, MPSW06G or SS9014.