How do I enable auto MDIX on my Cisco router?
Configuring Auto-MDIX on an Interface Auto MDIX is turned on by default. To disable Auto MDIX on a port, use the no mdix auto command under the interface configuration mode. To put it back to default, use the mdix auto command in the interface configuration mode.
What is MDIX mode on a switch?
A medium dependent interface crossover (MDIX) is a version of the medium dependent interface (MDI) enabling a connection between corresponding devices. Generally there are one to two ports on a switch or hub with an uplink switch, which can be used to alter between an MDI and MDIX interface.
What is MDIX Cisco?
Automatic medium-dependent interface crossover (Auto-MDIX) is a feature that allows the switch interface to detect the required cable connection type (straight-through or crossover) and automatically configure the connection appropriately.
What is required when using Auto MDIX?
Automatic medium-dependent interface crossover (auto-MDIX) is enabled by default. When you enable auto-MDIX, you must also set the interface speed and duplex to auto so that the feature operates correctly.
What is Auto-MDIX answer choices?
Auto-MDIX on an Interface. When automatic medium-dependent interface crossover (auto-MDIX) is enabled on an interface, the interface automatically detects the required cable connection type (straight through or crossover) and configures the connection appropriately.
What is auto negotiation in networking?
Auto-negotiation is an optional function of the IEEE 802.3u Fast Ethernet standard that enables devices to automatically exchange information over a link about speed and duplex abilities. Auto-negotiation is targeted at ports.
What is the purpose of auto-MDIX?
When automatic medium-dependent interface crossover (auto-MDIX) is enabled on an interface, the interface automatically detects the required cable connection type (straight through or crossover) and configures the connection appropriately.
What is the difference between MDI and MDIX?
MDI/MDIX is a type of Ethernet port connection using twisted pair cabling. The standard wiring for end stations is MDI, whereas the standard wiring for hubs and switches is MDIX. MDI ports connect to MDIX ports using straight-through twisted pair cabling.
What is Auto-MDIX quizlet?
What is auto-MDIX. a feature that detects Ethernet cable type. When a device is sending data to another device on a remote network, the Ethernet frame is sent to the MAC address of the default gateway.
What is primary purpose of ARP?
The basic purpose of the Address Resolution Protocol (ARP) is to resolve IP addresses to ethernet addresses. ARP mediates between broadcast link-level protocols and IP protocols. Specifically, it maps 32-bit IP addresses to 48-bit ethernet addresses.
What is the Auto MDIX future?
Explanation: The auto-MDIX enables a switch to use a crossover or a straight-through Ethernet cable to connect to a device regardless of the device on the other end of the connection.
Why is auto-negotiation not recommended?
Auto-negotiation problems are common; they result from errors on the Ethernet devices connected to the appliance, causing dropped packets, reduced throughput, and session drops. Many users prefer to manually set the speed and duplex mode of the Ethernet NICs so that it will not re-negotiate.
Is there auto MDIX on Cisco Catalyst 2950?
Note: The auto-MDIX feature is enabled by default on Catalyst 2960 and Catalyst 3560 switches, but is not available on the older Catalyst 2950 and Catalyst 3550 switches. To examine the auto-MDIX setting for a specific interface, use the show controllers ethernet-controller command with the phy keyword.
What kind of power supply does Cisco 2960 XR have?
Cisco Catalyst 2960-XR Series Switches include a field-replaceable modular power supply and can accommodate a second power supply. The 2960-XR Series is available only with the Cisco IOS IP Lite feature set. Tables 4 and 5 list the configurations of the 2960-X and 2960-XR Series, respectively.
What does Cisco flexstack extended do on a 2960 XR switch?
Cisco FlexStack-Extended enables a long-distance out-of-the wiring-closet stack option (floor to floor). It allows back-panel stacking of up to eight Cisco Catalyst 2960-X or 2960-XR Series Switches. FlexStack-Extended can be added to a Cisco Catalyst 2960-X or 2960-XR Series Switch with a back-panel stacking slot.
What kind of software does Cisco Catalyst 2960-L use?
They operate on Cisco IOS ® Software and support simple device management and network management via Command Line Interface (CLI) as well as an on-box web interface. Catalyst 2960-L Smart Managed Switches are secure, reliable, enterprise grade switches built for small office deployments.