How do I disarm my digital life alarm?

Disarm Disarm Basic system operation You enter your four (4) digit Alarm Panel PIN into a keypad to disarm the system. You must create your Alarm Panel PIN by speaking with a Digital Life Customer Care Technical Support agent or accessing

How do I change the code on my digital life keypad?

To change the Master PIN:

  1. Enter master pin then press #
  2. Enter 1 then #
  3. Enter New Master pin then #
  4. press * to end program. *I am an AT employee, and the postings on this site are my own and don’t necessarily represent AT’s position, strategies or opinions.

Why is my digital life camera offline?

If the camera is still offline, there may be a problem with your home network. You can reset your home router and/or modem. A) Power off the camera (unplug the camera, or hold the button down for 5 seconds until the lights turn off; press it to turn it back on after about 1 minute.)

How do you program a digital life door lock?

Using the keypad on the lock, do the following to reset the PIN:

  1. Enter the 4-8 digit Master PIN code followed by “#” key.
  2. Enter “1” followed by “#” key.
  3. Enter a 4-8 digit PIN code for the new master pin number followed by the “#” key.

How do you remove Digital Life equipment?

Call Digital Life Customer Care, 855.288. 2727, option 4. Early termination fees may apply. Please note that you may have to schedule time to have a technician uninstall select equipment or return equipment purchased before service is cancelled.

How to install at & T Digital Life system?

Unplug this product before cleaning. Installation and Operations Manual 1 Introduction The AT Digital Life System (DLS) is a service delivery platform that AT will be commercially deploying.

Where can I find the at & T product manual?

CL83101 User ManualCL83101 EL52450 User ManualEL52450 EL52450 Quick Start GuideEL52450 EL52350 User ManualEL52350 EL52350 Quick Start GuideEL52350 EL52301 User Manual Canada – FrenchEL52301 EL52301 Quick Start Guide Canada – FrenchEL52301 EL52301 Quick Start GuideEL52301 EL52301 User ManualEL52301

How does at & T Digital Life alarm manager work?

The Alarm Manager application sends alarm messages over the AT Cellular Data Network to a DMP IP Alarm Receiver located in an AT Digital Life Data Center. The alarms are then automatically passed to the AT Digital Life Central Monitoring Center for handling.

What kind of radio does at & T digital life use?

A proprietary two-way 915MHz radio technology is utilized with wireless keypads and sirens, (See Figure 5.).