What does nr0 mean on washing machine?

Bosch Logixx 8 error code nr0 means – The childproof lock has been activated. Just deactivate the childproof lock.

How do I fix Error 23 on my Bosch washing machine?

Here is what you need to do:

  1. disconnect the washing machine from the water supply and sewerage;
  2. drain the pallet from the washing machine;
  3. turn the device on its side;
  4. gently remove the pallet;
  5. look inside the case through the bottom of the machine.
  6. if necessary, repair the fault by replacing the worn out parts.

What is E16 error in Bosch washing machine?

Washing machine troubleshooting: error code E16 or F16 These error codes indicate that the door is open. Please close the door and proceed as usual. If you’re still getting the error after closing the door, please verify it’s properly closed.

What does NRO mean on Bosch washing machine?

nro means the childlock is turned on. . To turn the lock off you need to press and hold the start button for several seconds. This should take the lock off.

What does code E32 mean on Bosch washing machine?

Error E32 or E60 Error code E32 alternately flashes “End” on the display. There’s no real error, but the washing machine has interrupted the washing cycle because of an imbalance in the drum. The laundry isn’t distributed evenly. Properly distribute the laundry over the drum.

Where can I find the fault code for my Bosch washing machine?

0345 017 0803 Appliance Shop Book a Repair SearchSearch Kitchen Appliance Fault Codes Fault codes or error codes for appliances including washing machines, washer dryers, cookers, dishwashers and fridges. Error codes for Bosch Washing Machine

What should I do if my Bosch washing machine is noisy?

A noisy spin cycle isn’t the end of the world. Don’t let a broken water inlet valve break your spirit. And don’t be afraid of those error codes you don’t understand.

Is there an authentication error ox80004005?

“An authentication error has occurred (Ox80004005).” Have any of you seen this one outside of the couple of unrelated threads here? This is definitely a problem with the client system, but I can’t seem to locate it. NOTE: I will likely be unable to test any potential solutions until Tuesday.

Why does my Bosch washing machine say F04?

Bosch Washing Machine Error Code F04 – If your washing machine has flagged up with either of the following F04 error code, the likely offender for this cause would be a faulty motor. Advice: Depending on your model, remove the backplate to access the motor. Remove the motor and check for any signs of damage.