How do I setup my Linksys WRT54G wireless G router?

How to Set Up a Linksys WRT54G Wireless G Router

  1. Step 1: Connect the Modem. Plug the Ethernet cable from your cable or DSL modem into the Internet port on the router.
  2. Step 2: Connect Your Computers.
  3. Step 3: Connect the Power.
  4. Step 1: Log In.
  5. Step 2: Open Wireless Settings.
  6. Step 3: Name the Network.
  7. Step 4: Set Up Security.

How do I install Linksys Wireless G Broadband router?

How to Set Up a Linksys Wireless G Broadband Router

  1. Connect the broadband Internet modem to the computer using an Ethernet cable.
  2. Connect the Broadband modem to the Linksys Wireless G router’s “Internet” port using an Ethernet cable.
  3. Plug the router into the power outlet.

How do I update firmware on WRT54G?

Upgrade the Linksys Wireless Firmware. From the web interface, go to Administration -> Firmware Upgrade -> Choose the latest file that you downloaded above -> Click on Upgrade. Once the upgrade started, do not click on any other link on the web interface. Just wait until the upgrade is completed.

How do I update my Linksys router software?

  1. Launch a web browser and enter “192.168.
  2. Enter your login credentials.
  3. Click on Administration > Firmware Upgrade.
  4. Click the Browse…
  5. Locate and select the file that you have downloaded then click Open.
  6. Click the Start Upgrade button.
  7. Click Continue when it prompts that the upgrade has been successful.

How do I update my Linksys wireless router?

  1. Log in to your Linksys server account.
  2. Under the Firmware Update section under the Basic tab, click Check for Updates.
  3. Once the router detects a firmware update, you will be able to download and install the firmware on your device.
  4. On the Update firmware pop-up box, click Yes.
  5. A Router Reboot screen will pop up.

Is Wireless-G still used?

802.11g for Home Networking and Travel Many home networks today still operate using 802.11g routers. A 802.11g wireless router typically has an indoor range of 125 feet.

What is the Linksys WRT54G wireless-G broadband router?

1. What is the Linksys WRT54G Wireless-G BroadBand Router? The Linksys WRT54G Wireless-G Broadband Router is a 3-in-1 residential gateway device. It acts as a wireless access point which lets you connect your wireless computers and devices to it without using wires.

How to set up a Linksys wireless router?

Linksys WRT54G Wireless-G Broadband Router Begin setup of your Linksys Wireless Router by first plugging in the power. Give it 10 seconds or so to initialize and then plug an ethernet cable into your wall jack and into the port on the back of the router marked Internet.

What’s the default IP address for Linksys WRT router?

See what’s new with the Linksys WRT Wireless Router! To learn more, click here. 2. What default IP Address, username and password are used to log in to the router’s web-based setup page? The default IP Address is 192.168.1.1. On the log in window, leave the username blank and the password is “admin”.