How do I know what transmission I have in my Jeep?
The transmission in a Jeep is identified by an identification plate. This plate is stamped on the housing of the transmission and the location can vary, depending on the model year of your Jeep. The numbers on the identification plate provide the build date, part number and the build date.
What transmissions do Jeeps use?
The Jeep Wrangler has undergone three facelifts since the year 1987….Which Transmissions Came in Which Wranglers?
| Wrangler Gen/Year | Engine | Transmission |
|---|---|---|
| TJ 1997-2006 | 2.4 I-4 | 6-Spd NSG370 Manual (2005-2006) |
| 2.5 I-4 | 3-Spd 30RH Auto (1997-2002) | |
| 5-Spd AX-5 Manual (1997-2002) | ||
| 4.0 I-6 | 3-Spd 32RH Auto (1997-2002) |
How do I know if I have a T14 transmission?
Identification. The T14 transmission is 8-11/16″ long and features a cast iron top cover that is retained by six bolts. The main case is of cast iron. The case itself has two protruding bosses as provisions for side-shifting actuators, however, no known Jeep side-shift applications are known.
How do I know if I have a Dana 20 transfer case?
The Dana 20 is a cast iron transfer case, having a passenger-side front output and a centered rear output. It has the same “Texas” front mounting input flange as does the Dana 18. Markings on the Dana 20 can vary, but most start with a C18-15-24… Some confuse them for a large case Dana 18 because of this.
What fluid goes in a Dana 300 transfer case?
Yep, 85W90 gear lube. Takes about 2.5 quarts to fill it.
What kind of transmission does a Jeep CJ use?
Borg-Warner T4 & T5 Transmissions The Borg Warner T4 & T5 transmissions were standard shift, four-speed & five-speed transmissions (respectively) found in 1982 to 1986 Jeep CJ models. These transmissions are popularly replaced with the SM420 and SM465 transmissions, since they share a similar bellhousing bolt pattern and compact installations.
Can a jeep be converted to a V8 transmission?
Because of these transmissions’ weak service records behind stock Jeep powerplants, we do not offer any conversion to V6 or V8 power. This is essentially a small car transmission in a truck. The customer’s time and efforts are best spent converting to a stronger transmission.
What kind of engine does a Jeep CJ 7 have?
The CJ-7 was originally offered with the 232 I6 as the stock engine and the 258 and 304 as an optional engines. In the late 70s, the 232 was dropped and the 258 became the stock engine. In 1980, the GM 151 I4 I4 engine was stock and the 258 and 304 were optional. The last year for the 304 was 1981.
When was the last year Jeep made a CJ?
The ’80-’86 CJs used medium and light duty transmissions compared to the heavy duty transmissions available in the late 70s. 1980 marked the return of the I4 CJ with the introduction of the GM 151 engine. 1981 was the last year for the V8 in a CJ from the factory.