How do I connect to Linksys WAP54G?
Connect to a Router
- Connect the Linksys WAP54G device to your Internet modem using the Ethernet cable.
- Open a Web browser and type “http://192.168.1.245” — without quotation marks — in the address bar.
- Type “admin” — without quotation marks — in the password field.
Can I use wrt54g as repeater?
You can turn the Linksys WRT54GS router into a repeater bridge by resetting the router, updating the firmware, setting a static IP address on your computer, changing the router settings then resetting the computer IP address. This task can be complex and time-consuming; only advanced users should try it.
How to set up a wap54g as a wireless repeater?
Click on the AP Mode sub-tab then select the Wireless Repeater option. Enter the Wireless LAN Mac Address from the WRT54G then click Save Settings. You can now place the WAP54G in another nearby location (with its power adapter plugged in) so it can repeat the wireless signal from the WRT54G.
How to set up a Linksys access point as a wireless repeater?
Linksys Wireless-G Router (WRT54G) To configure the access point as a wireless repeater, you need to perform two steps: Checking the Wireless MAC Address of a Wireless Router/Access Point. Setting-Up Wireless Repeater Mode on the WAP54G.
What’s the IP address for a Linksys wap54g?
Connect the WAP54G directly into one of the WRT54G’s numbered ports. Open a web browser like Internet Explorer. On the Address bar, enter the IP address of the WAP54G then press [Enter]. NOTE: The default IP address is 192.168.1.245. A new window will prompt for a User name and Password .
How do I Set my router as a wireless repeater?
When the router’s web-based setup page opens, click Status then click Wireless. Take note of the MAC Address. This is your router’s wireless MAC address. NOTE: The Wireless MAC Address you took note of will be entered on the WAP54G set as wireless repeater.