How do I know which Ideal Standard toilet I have?
Look for the manufacturer name or a number on the bottom side of the water tank lid. It may be stamped into the lid or painted on – some of them may even be handwritten if the tank lid was replaced by a plumber with foresight.
Why Does My Ideal Standard toilet keep running?
The problem may be that your toilet’s water supply is filling the tank too quickly to allow the close-off float to trigger, resulting in an endlessly running toilet. If the water is flowing back into the tank too quickly, then the float that triggers the shut-off valve might never reach its designated shut-off point.
Are toilet cisterns a standard size?
Considered the standard type of cistern till very recently, low level cisterns are sited just above and behind the WC pan. Dimensions: Low level cisterns are on average 455mm wide, 350mm high, and project 230mm from the wall. Larger and smaller sizes are also available.
Can you just replace the cistern on a toilet?
You would only be replacing a cistern for two reasons: style or there’s a fault. When a cistern stops working, it or its valves and mechanisms may have become cracked or damaged. The cistern will need to be removed or replaced in order to get your toilet working properly again.
What is Ideal Standard AquaBlade?
AquaBlade is an award-wining, patented flush technology, introduced by Ideal Standard. It offers a superior flushing action, even with low water volume. The AquaBlade system is a smart innovation in flushing that gives a cleaner, quieter flush thanks to a smarter design, with the aim of offering unmatched hygiene.
Is ideal toilet seat hinges?
How do soft close toilet seats work? The Ideal Standard soft close toilet seat features hinges which force the toilet seat to close by itself, slowly and softly.
Why does my dual flush toilet keep running?
Why is My Dual Flush Toilet Constantly Running? If you have a dual flush toilet that is constantly running, most likely the dual flush valve seal is worn out, warped or dirty and hence not sealing properly. It could also be as a result of a defective fill valve continuously filling the tank.
How many Litres is one toilet flush?
For example a full flush toilet uses about 11 litres per flush compared to a dual flush toilet which can reduce each full flush to 4.5 litres and each half flush to 3 litres. If you have 100 users on a daily basis this could save up to 1100,000 litres annually.
Can you mix and match toilet bowls and tanks?
There are a few models that can interchange tanks and bowls, but most are configured to work as a set, as indicated in our product showcase. If you mix and match yourself, the toilet may not flush at all. Tanks and bowls can not be mixed.
How much should a plumber charge to replace a toilet?
A plumber charges around $375 to replace a toilet. Most charge between $275 and $480. This includes the cost of removing and disposing of your old toilet. Note that the actual cost to replace a toilet depends on your location, the type of toilet and the difficulty of the installation.